Position: Home -> Support -> Knowledge Base -> The Ultimate Guide to the High Power LED Light – 1st Section

The Ultimate Guide to the High Power LED Light – 1st Section

Written by the Merchandise Development Team
Wednesday, 13 August 2014, 8:50

For the T8 LED tube manufacturer, the high power LED light product is also the important product line. Below is the ultimate guide to such lights.

1. The LU-PC-1W type unit lights.

1.1 The performance.

The LU-PC-1W type light uses a single power LED as a unit. Its color is divided into red, green, blue and white, as shown in Figure 01. This wholesale LED light solves the problem of the high power LED heat. It has good thermal conductivity and can be combined into a variety of different forms of power and various voltage lamps or other lighting devices.

The high power LED bulb uses the low-power supply unit. It is safe, reliable and has long service life.

LED lights use low-voltage power supply unit, safe, reliable, low power consumption, and long service life. According to the instruction of the LED tube supplier, its installation and operating method are simple, just using a power cord to connect the constant current driver to the control system. The application of such wholesale LED bulb is very easy.

1.2 The main parameters.

1.2.1. The technical parameters.
• Color range: red, green, blue, white.
• Light source: high brightness LED.
• Beam angle: 25 – 30 degrees.
• Housing material: PC / aluminum.
• LED quantity: 1pc.
(The users can refer to the actual parameters of the LED spotlight for details.)

The LU-PC-1W type unit lights
Figure 01 The LU-PC-1W type unit lights.
(a) The physical appearance. (b) The dimensions.

 

1.2.2. The electrical specifications.
• Rated voltage: 2 / 4V DC for the red; 3.5V DC for the green, blue and white.
• Rated power: 1w.
• Waterproof: IP68.

1.2.3. The environmental specifications.
• Recommended temperature: -20 – 40 degrees Celsius (using industrial graded components).
• Product dimensions:.Φ28.5mmXΦ22.5mmXH20.6mm.

1.3. The electrical connection.

When installing the LU-PC-1W type high power LED light, the LED spacing can adjust to follow its own configuration, such as the LED PAR light. The electrical connection method is shown in Figure 02.

The connection diagram of the LU-PC-1W type unit light.
Figure 02 The connection diagram of the LU-PC-1W type unit light.

 

2. The LU- PC-MP12V type unit lights.

2.1. The performance.

The LU- PC-MP12V type unit light uses a single high power LED bulb as a unit. The color is divided into red, yellow, green, blue and white. Its housing material is PC, as shown in Figure 03. The T8 LED tube manufacturer designed it as using the 12V low voltage power supply. It is safe and reliable. Its rated power is only 1w with low power consumption and long service life. This wholesale LED light is suitable for indoor and outdoor decorative lighting, such as the living room, hallway, kitchen cabinets, product display cabinets, toilets and so on.

The LU- PC-MP12V type unit lights
Figure 03 The LU- PC-MP12V type unit lights

 

2.2. The main parameters.

2.2.1. The technical parameters.
• Color range: red, green, blue, white, yellow.
• Light source: 1w high power LED light.
• Beam angle: 25 – 30 degrees.
• Housing material: PC.
• LED quantity: 1 pc.
(For more information contact the LED tube supplier.)

2.2.2. The Electrical specifications.
• Rated voltage: 12V DC / AC.
• Rated power: 1w.

2.2.3. The environmental specifications.
• Recommended temperature: -20 – 40 degrees Celsius (using industrial graded components).
• Product dimensions: Φ33.6mmXH40.5mm.

2.3. The Installation and connection method.

When installing the wholesale LED bulb, the LED spacing is required to follow their own configuration. It should be connected in series. The electrical connection method is shown in Figure 04.

The connection diagram of the LU- PC-MP12V type unit light.
Figure 04 The connection diagram of the LU- PC-MP12V type unit light.

 

3. The angle-adjustable high power LED spotlight.

3.1. The performance.

Figure 05 shows the LU-PC-ADJ-1U/3U type angle-adjustable high power LED spotlight. This spotlight uses the LED light source, comprised by 1 or 3 high power LED units. The color is white light. Such spotlight has good thermal conductivity. The housing is made of metal, and the surface cover is made of the transparent PC.

The angle-adjustable high power LED spotlight and the application.
Figure 05 The angle-adjustable high power LED spotlight and the application.
(a) The angle-adjustable light. (b) The application examples.

 

This type of LED spotlight uses the low-voltage power supply. It is safe and reliable with low power consumption and long service life. Just a power cord can connect the control system with the constant current driver. Each current source can drive three 3U spotlights, or drive 12 1U spotlights.

Scope: landscape lighting, architectural lighting, billboard lighting, green landscape lighting and decorative lighting places.

3.2. The main parameters.

3.2.1. The technical parameters.
• Color Range: white.
• Source: high power LED.
• Beam angle: 25 – 30 degrees.
• Housing material: metal.
• LED quantity: 1 pc / 3 pcs

3.2.2. The electrical specifications.
• Rated voltage:. 10.5V DC.
• Rated power: 1W / 3W.
• Constant current source drive: 100 - 240V / 3-33V.

3.2.3. The environmental specifications.
• Recommended temperature: -20C – 40 degrees Celsius (using industrial grade d components).
• Product dimensions: Φ69.0mmX29.1mm.

3.3 The Installation.

When installing the LU-PC-ADJ-3U wholesale LED light, each constant current driver should connect up to four lights, as shown in Figure 06.

The installation schematics of the LU-PC-ADJ-3U lights.
Figure 06 The installation schematics of the LU-PC-ADJ-3U lights.

 

When installing the LU-PC-ADJ-3U, each constant current driver should connect up to twelve lights, as shown in Figure 07.

The installation schematics of the LU-PC-ADJ-3U lights.
Figure 07 The installation schematics of the LU-PC-ADJ-3U lights.

 

For the second section of the high power LED bulb introduction, please refer to “A Comprehensive Introduction to the High Power LED Bulb – 2nd Section”.

Last updated on Wednesday, 13 August 2014, 17:10

=> Visit the Support section at www.misctek.com for more articles that are even better!


Page 1 of 1 Back to Knowledge Base of LED light, portable charger and useful gadget | Goto top of LED light supplier's webpage

Support Center

Products

News

Contact us